IPT’s Pipe Trades Training Manual is a user friendly, spiral bound classroom size of 8 1/2″ x 5 3/4″, with 500 pages, 12 sections, 281 illustrations and 117 tables. The Manual version has identical contents to the Handbook, but varies in that it has comprehensive questions at the end of each section and comes with a separate answer book. This format is excellent for classroom training or self study. This book sets the standard for piping handbooks. It contains all the necessary previously combined in other reference books, plus much more. It includes information on: pipe and tube data; valves; fittings, flanges and gaskets; offsets and calculations; pipe layout (simplified and detailed); piping prints; oxy-acetylene set-up and pipe welding; pipe rigging. The book is excellent for on-the-job reference, and also contains more than enough data for a complete training program.
IPT’s Pipe Trades Training Manual has identical contents to the Handbook, but varies in that it has comprehensive questions at the end of each section and comes with a separate answer book.
This format is excellent for classroom training or self study.
This book sets the standard for piping handbooks. It contains all the necessary previously combined in other reference books, plus much more.
It includes information on: pipe and tube data; valves; fittings, flanges and gaskets; offsets and calculations; pipe layout (simplified and detailed); piping prints; oxy-acetylene set-up and pipe welding; pipe rigging.
SECTION ONE – PIPE DATA |
|||
|---|---|---|---|
| Pipe Manufacturing | p 2-6 | Stainless Steel Pipe | p 53-58 |
| Welded Pipe | p 2-3 | Stainless Pipe Sizes (Imperial) | p 54-56 |
| Seamless Pipe | p 4-6 | Stainless Pipe Sizes (Metric) | p 57,58 |
| National & International Standards | p 7-11 | Copper & Brass Pipe | p 59-61 |
| API Standard | p 7 | Copper & Red Brass Pipe Sizes | p 60,61 |
| ASTM Standard | p 7,8 | Cast Iron Pipe | p 61-64 |
| AWWA Standard | p 8 | Cast Iron Pressure Pipe | p 63 |
| AS Standard | p 8 | Cast Iron Soil Pipe | p 64-68 |
| BS Standard | p 8,9 | Silicon Iron Pipe | p 64 |
| CSA Standard | p 9 | Plastic Pipe | p 66-81 |
| DIN Standard | 9,10 | Thermoplastic Pipe | p 69 |
| GOST Standard | p 10 | Thermoset Pipe | p 69 |
| ISO Standard | p 10 | Laminated & Composition Pipe | p 70 |
| JIS/LR Standard | p 10,11 | Plastic Pipe Standards & Ratings | p 70-73 |
| LR Standard | p 11 | Pressure Ratings (psi) | p 71 |
| Pipe Properties & Characteristics | p 11,12 | Pressure Ratings (kPa) | p 72 |
| Schedule Numbers | p 13-15 | Thermoplastic Temperature Factors | p 73 |
| General Piping Design | p 14-17 | Temperature Correction Factors | p 74 |
| Threading Allowance | p 16 | Plastic Selection & Usage | p 75-77 |
| Actual & Nominal Pipe Sizes | p 16,18 | ABS Pipe | p 75 |
| Steel Pipe Sizes | p 18-45 | PVC Pipe | p 75 |
| Steel Pipe (Imperial) | p 18-32 | CPVC Pipe | p 76 |
| Steel Pipe (Metric) | p 33-45 | PE Pipe | p 76 |
| Pipe Lengths | p 46 | PP Pipe | p 77 |
| Pipe End Finish | p 46,47 | PB Pipe | p 77 |
| Pipe Identification | p 48-50 | PVDF Pipe | p 77 |
| ASTM Marking | p 48 | RTRP Pipe | p 78 |
| API Marking | p 49 | Solvent Cementing | p 78-81 |
| CSA Marking | p 50 | Threading Plastic Pipe | p 81 |
| Finishing Processes | p 51 | Grooved Plastic Joints | p 82 |
| Galvanizing | p 51 | Flanged Plastic Joints | p 82,83 |
| Corrosion Protective Coatings | p 51,52 | O-Ring Plastic Joints | p 84 |
| Wrought Iron Pipe | p 53 | Joining RTR Pipe | p 84 |
SECTION TWO – TUBE DATA |
|||
|---|---|---|---|
| Tube vs Pipe | p 86 | Still Tube | p 105 |
| Structural Tube | p 86,87 | Steel GP Tube | p 105,106 |
| Mechanical Tube | p 87 | Special Application Tube | p 106,107 |
| Pressure Tube | p 87-89 | Bundled Metallic | p 106,107 |
| BWG Gage | p 87,88 | Special Alloy Tube | p 107 |
| Aluminum Tube | p 89,90 | Plastic Tube | p 107,108 |
| Copper Tube | p 91-100 | Tube Bending | p 109-115 |
| Copper Tube Types K-L-M | p 91-95 | Compression Tube Bender | p 109,110 |
| Copper Color Coding | p 92 | Bending Near Fittings | p 110,111 |
| DWV/ACR Tube | p 96-98 | Recommended Wall Thickness | p 111 |
| Copper GP Tube | p 99,100 | Bending Steps | p 112,113 |
| Steel Tube | p 100-104 | Degree Bending | p 112,113 |
| Tube Specifications (Imperial) | p 101,102 | Bending Length Increase | p 114 |
| Tube Specifications (Metric) | p 103,104 | ||
SECTION THREE – VALVES |
|||
|---|---|---|---|
| Basic Valve Types | p 118 | Reduced Port Ball Valve | p 133 |
| Gate Valves | p 118-121 | Butterfly Valves | p 134,135 |
| Solid Wedge Gate Valve | p 119 | Wafer Type Butterfly Valve | p 134 |
| Flexible Wedge Gate Valve | p 119,120 | Double Flanged Butterfly Valve | p 135 |
| Split Wedge Gate Valve | p 120,121 | Plug Valves | p 136,137 |
| Double Disc Gate Valve | p 120,121 | Lubricated Plug Valve | p 136 |
| Globe Valves | p 121-125 | Multi-port Plug Valve Arrangements | p 136,137 |
| Angle Body Globe Valve | p 122,123 | Relief & Safety Valves | p 137,138 |
| Y-Pattern Globe Valve | p 122,123 | Valve End Connection Variations | p 139 |
| Conventional Disc (Globe Valve) | p 123,124 | Valve Bonnet Assemblies | p 139-143 |
| Plug Disc (Globe Valve) | p 123,124 | Valve Socket Dimensions | p 140 |
| Composition Disc (Globe Valve) | p 124,125 | Threaded Bonnet | p 141 |
| Needle Valve (Globe Valve) | p 124,125 | Union Bonnet | p 141 |
| Check Valves | p 125-127 | Bolted Bonnet | p 141 |
| Swing Check Valve | p 125,126 | Pressure Seal Bonnet | p 141 |
| Lift Check Valve | p 127 | Welded/Clip Type Bonnet | p 142 |
| By-Pass Valves | p 127-129 | Special Bonnet Designs | p 142,143 |
| By-Pass Connections & Locations | p 127,129 | Valve Stem Design | p 143,144 |
| Diaphragm Valves | p 128-132 | Inside Screw Rising Stem | p 144 |
| Weir Type Diaphragm Valve | p 130 | Inside Screw Non-Rising Stem | p 144 |
| Straightway Diaphragm Valve | p 130,131 | Outside Screw Rising Stem | p 144 |
| Pinch Valves | p 131 | Quick Opening Sliding Stem | p 144 |
| Air Operated Pinch Valve | p 13 | Valve Identification & Marking | p 145-147 |
| Diaphragm Valve Materials | p 132 | Valve Installation | p 148-151 |
| Ball Valves | p 133 | Valve Dimension Tables | p 152-164 |
SECTION FOUR – FITTINGS |
|||
|---|---|---|---|
| Pipe Fitting Types | p 166-173 | Cast Iron Threaded Fitting | p 188,189 |
| Fittings (Elbows) | p 166-168 | Welded Fittings | p 190-206 |
| Fittings (Unions) | p 169 | Socket Weld Fittings | p 190-193 |
| Fittings (Couplings) | p 170 | Butt Weld Fittings | p 194-203 |
| Fittings (Tees/Wyes/Crosses) | p 171-173 | Weld Outlets | p 204-206 |
| Copper Solder Fittings | p 173-176 | Grooved Fitting Joints | p 207,208 |
| Threaded Fittings | p 177-189 | Tube Fittings | p 209 |
| Threaded Fitting Engagements | p 178,179 | Swagelok Designations | p 210,211 |
| Malleable Iron Threaded Fittings | p 180,183 | Swagelok Fittings | p 212-215 |
| Forged Steel Threaded Fittings | p 184-187 | ISA Fittings | p 215,216 |
SECTION FIVE – GASKETED JOINTS |
|||
|---|---|---|---|
| Flange Types | p 218-225 | Flange Data (Class 900/Alloy) | p 232 |
| Weld Neck Flange | p 218 | Flange Data (Class 1500/Alloy) | p 233 |
| Slip-on Flange | p 218 | Flange Data (Class 2500/Alloy) | p 234 |
| Lap-joint (Van Stone) Flange | p 219 | Flange Gaskets | p 235-254 |
| Reducing Flange | p 219 | Metallic Ring Gaskets | p 235,236 |
| Socket Weld Flange | p 220 | Full Face & Flat Ring Gaskets | p 237 |
| Blind Flange | p 220 | Gasket Materials | p 238,239 |
| Spectacle Blind Flange | p 220 | Gasket Design Configurations | p 240-242 |
| Screwed/Orifice Flanges | p 221 | Flat Gaskets | p 240 |
| Flange Faces | p 222-225 | Reinforced & Multi-Ply Gaskets | p 240 |
| Raised Face | p 222,223 | Corrugated Metal Gaskets241 | |
| Large Male & Female | p 222,223 | Spiral wound Gasket (Flexatallic) | 241 |
| Large Tongue & Groove | p 223,224 | Metal Jacket/Serrated Gasket | 242 |
| Flat Face | p 223,224 | Metal Ring Gasket | 242 |
| Ring/Lap Joint | p 223,224 | Cutting Gaskets | 243,244 |
| Small Tongue & Groove | p 224,225 | Bolt Hole Layout | 245-249 |
| Small Male & Female | p 225 | Angle or Degree Method | 245-247 |
| Small Male & Female Threaded End | p 225 | Chord Chart Method | 247-249 |
| ASME/ANSI Flanges/Flange Markings | p 226,227 | Flange Bolting Specifications | 250-253 |
| Flange Data (Class 150/125) | p 228 | Bolting Cast Iron Flanges | 52,253 |
| Flange Data (Class 300/250) | p 229 | Bolt Size & Length | 253,254 |
| Flange Data (Class 400/Alloy) | p 230 | Wrench Size | 254 |
| Flange Data (Class 600/Alloy) | p 231 | ||
SECTION SIX – PIPE OFFSETS |
|||
|---|---|---|---|
| Offset Terms | p 256 | Tangent to Find Spread Length | p 267 |
| Offset Calculation Methods | p 257 | Equal Spread 90 Degree Turn | p 268,269 |
| Constant Multiplier Calculation | p 257,258 | Rolling Offsets | p 269-271 |
| Trigonometry Offset Calculation | p 259 | Rolling Offset Calculation | p 270-271 |
| Fitting Allowance | p 259 | Steel Square Calculation | p 272 |
| Calculating 45 Degree Offsets | p 259-262 | Trianqle Method Calculation | p 272 |
| Calculating Rise, Run, Travel | p 261,262 | Offsets Around Square Corners | p 273 |
| Equal Spread 2 Pipe Offsets | p 262-269 | Offsets Around Circular Objects | p 274,275 |
| Calculating Equal Spread Lengths | p 263-266 | Pipe Runs Around Tanks | p 276-278 |
SECTION SEVEN – TRIGONOMETRY |
|||
|---|---|---|---|
| Right Angle Triangles | p 280-284 | Trigonometric Functions | p 285 |
| Pythagorean Formula | p 280 | Trigonometry Formulas | p 286 |
| Right Angle Triangle Functions | p 282-284 | Trigonometry Table | p 287-292 |
SECTION EIGHT – PIPE LAYOUT |
|||
|---|---|---|---|
| Fabricated Fittings (Elbows) | p 294-297 | 16 Division Two Piece Miter | p 312,313 |
| Establishing Centerlines on Pipe | p 298,299 | Tee Layout – Saddle In (Simplified) | p 314-317 |
| Pipe Wrap-Around | p 300 | Tee Layout- Saddle On (Simplified) | p 318-324 |
| Sectoring Pipe | p 300,301 | Lateral Layout (Simplified) | p 324-328 |
| Mitered Turns | p 302-309 | Orange Peel Cap | p 328,329 |
| 2 Piece Miter | p 302-306 | True Wye Layout (Simplified) | p 330-333 |
| Cut Angle of Miter | p 302 | Template Layout | p 333-345 |
| Cut Back Distance | p 302 | Miter Turn Templates | p 334,335 |
| Factor of the Cut Angle | p 303,304 | 45 Degree Lateral Template | p 336-339 |
| Multi Piece 90 Degree Miters | p 307-309 | Tee Template Development | p 340-344 |
| Ordinate Lines | p 310 | Wye Template Development | p 344,345 |
| Multiple Ordinate Lines | p 311,312 | ||
SECTION NINE – PIPING PRINTS |
|||
|---|---|---|---|
| Lines on Prints | p 347-360 | Flow Diagram | p 367,368 |
| Line Description & Function | p 347-349 | P&ID (Piping & Instrumentation) | p 369-371 |
| Piping Line Symbols | p 351,352 | Orthographic Projection | p 372,373 |
| Section Line Symbols | p 353 | Dimensions Elevation & Coordinates | p 373,374 |
| Single or Double Line Drawings | p 354 | Pictorial Pipe Drawing | p 374,375 |
| Line Identification Numbers | p 354,355 | Isometric Pipe Drawing | p 375-377 |
| Standard Piping Symbols | p 355-360 | Isometric Dimensioning | p 377-379 |
| Piping Notes & | |||
Be the first to review “IPT’s Pipe Trades Training Manual”
Related products
Reviews
There are no reviews yet.